PPG 300 Modular – Recreated

PPG 300 Sequencer Synthesizer

Overview Wolfgang Palm developed the 300 series modules as a replacement for his original Moog Modular like 100 series in 1976. He re-used some of the circuits and added new front panel designs. The 300 Modular Synthesizer consisted of 17 modules, plus cabinets and keyboards. Some of the later modules are very rare, perhaps never made, such as the 312 Voltage Processor and 306 Fixed Filter Bank. The 300 series was replaced during 1978 by the emerging range of microprocessor based products (350 and 360).

Klaus Schulze added a set of PPG 300 analog modules and two PPG analog sequencers in 1976, and placed them on top of the Big Moog, where the ARP 2600 and EMS 8 Octave Bank usually lived. The PPG setup replaced the Synthanorma SQ312 analog sequencer, and his ARP 2600 in the live rig.

This 300 Modular system probably cost £15,000 in today’s money (DM 8000 at the time), the 314 sequencer was particularly expensive. He kept the PPG Modular setup until he moved onto digital synths in the early 1980’s, and it seems to have been sold quickly, whilst the Big Moog survived in his studio until 1996.

The Moog IIIP only has a few filters, and you can see the 904C set to Band Reject, so I am sure Klaus enjoyed the additional PPG sounds. He expanded his live rig in the late 1970’s with two Minimoog’s and a Multimoog, so he loved the Moog filter! In 1980 Klaus swapped out the Moog 991 and 994 and put two PPG 303 VCF/VCA modules into his Big Moog.

The Klaus Schulze left hand rack contains two sets of 314 sequencers and 313 analog switches. The right hand rack contains a three VCO mono synth, consisting of;

  • 301 VCO x3
  • 303 VCF & VCA
  • 315 Dual Analog Multiplier
  • 316 Random Voltage Generator
  • 308 Dual DADSR
  • 311 Power Supply

Live concert pictures of Klaus Schulze show the VCO’s, VCA and DASDR patched but the 315 and 316 not used. Klaus clearly choosing more traditional analog sounds rather than using the more experimental noise and ring mod sounds available. The dual sequencer setup was used across the whole Moog and PPG system, giving Klaus a total of four 8 – 24 step sequencers.

Recreation In mid 2021 I began to research whether the PPG 300 modules could be recreated. There are no official schematics, and any available are partial and hand drawn. Unfortunately Wolfgang Palm destroyed his hardware archives around 1999 but I was very fortunate that a set of detailed pictures of some of the modules was donated to me, with front panel and PCB images.

My recreation process is based on tracing out the schematics from these images and making some assumptions on components that were used and available in 1976. For example the CA3080 datasheet shows both four and two quadrant multiplier circuits. Here is a full list of the PPG 300 modules; they all run from +/-12V power supplies:

  • 301 – VCO based on “heated” 3046 with 4 wave shapes, PWM and Sync.
  • 302 – Control Panel – very rare internal routing module
  • 303 – Minimoog style VCF with the addition of a 3080 based VCA.
  • 304 – Noise & LFO
  • 305 – Dual LFO – although it has three LFO’s
  • 306 – Fixed Filter Bank – 12 Band with HP and TP?
  • 307 – Dual ADSR that uses 555 timer chips.
  • 308 – Dual ADSR with Delay
  • 309 – Signal Mixer with 4x audio inputs
  • 310 – Random Voltage Generator – Noise and S&H
  • 311 – Power Supply with front panel
  • 312 – Voltage Processor – no information except price at DM720
  • 313 – Clever analog switch, each step can be active for 1, 2, 3, 4 or 8 clock periods, before moving onto the next step
  • 314 – Advanced 3×8 step analog sequencer with accurate timing subdivisions
  • 315 – Dual Analog Multiplier,  4 and 2 quadrant multipliers based on 3080 OTA chips
  • 316 – Frequency and Envelope Follower (very rare)
  • 317 – Two 303 filters combined into a 24dB multi mode filter (LP, BP, Band Reject)

PPG also manufactured cabinets and various keyboards, including the PPG 322 Duophonic Digital Keyboard. By 1978 they had added touch sensors and CV wheels as options for the keyboards. In  1979 the focus shifted to the 350, 360 and 340/380 digital keyboards and wave synths.

2024 Update The project to recreate these modules was paused in 2022, after releasing an 8HP wide 303 VCF only module and prototyping the 313, 314 and 317. I returned to the project in the Autumn of 2024 with the advantage of SMD assembly and the choice of two panel manufacturers. The initial priority was to complete the 314 sequencer using a powder coated panel and white silk screen.

The original PPG 300 modules have 2mm thick black anodised aluminum panels with a white silkscreen. The white lines at the edges of the panel look like they complement Moog modules, which have etched silver lettering and graphics. Ideally I would use powder coated panels but they are too expensive for the anticipated small manufacturing run, and silk screening the white edges is tricky.

Therefore the AMSynths 300 modules use 2mm black anodised aluminum anodised panels with etched lettering and graphics, like Moog Modular! This approach is too expensive for the 314 at £100 per panel, so the 313/314 will use black powder coated aluminum panels with white silk screen.

2026 Update The plan to build a complete 300 system remains shelved, as the system is too basic in todays sophisticated Euro Rack market place. Some of the more complex modules are being taken forward into 2026 release plan; the sequencer and switch, and the 317 V.C. Modifier.

Leave a Reply

Your email address will not be published. Required fields are marked *