Module Planner


Introduction A quick list of which modules you need for which Moog modular system. The Klaus Schulze Moog modular is an older IIIP model which uses the original 901 VCO’s. My interpretation uses 921 VCO’s, here is the module list:

  • 1x 921 Voltage Controlled Oscillator
  • 3x 921A Oscillator Controllers (Only 2x in my version initially)
  • 9x 921B Oscillators (Only 6x in my version initially)
  • 3x 902 Voltage Controlled Amplifiers
  • 1x 903A Random Signal Generator
  • 1x 904A Voltage Controlled Low Pass Filter
  • 1x 904B Voltage Controlled High Pass Filter
  • [1x 904C Filter Coupler – Custom Build]
  • [1x 905 Reverberation Unit – Not Available]
  • 3x 911 Envelope Generators
  • 1x 911A Dual Trigger Delay
  • [1x 912 Envelope Follower – Not Available]
  • 1x 914 Fixed Filter Bank
  • [1x 984 Four Channel Mixer – Not Available]
  • [1x 991 Low Pass and High Pass Filter with Attenuator – Custom Build]
  • 1x 992 Control Voltage/Attenuator Panel
  • [1x 993 Trigger & Envelope Voltages Panel – Custom Build]
  • 1x 994 Multiples
  • 3x CP3A-M Console Panel
  • 3x CP3A-O Console Panel
  • 2x 960 Sequential Controller
  • 2x 961 Interface
  • 2x 962 Sequential Switch

System 15 This is a starter, small, modular system with 3 VCO’s:

  • 2x 902 Voltage Controlled Amplifiers
  • 1x 904A Voltage Controlled Low Pass Filter
  • 1x 907 Fixed Filter Bank – use 914 Fixed Filter Bank
  • 2x 911 Envelope Generators
  • 1x 921 Voltage Controlled Oscillator
  • 1x 921A VCO Driver
  • 2x 921B VCO’s
  • 1x 923 Random Noise & Filter
  • 1x 995 Attenuator
  • 1x CP35 Console Panel

System 35 This is a medium scale modular with 5x VCO’s.

  • 3x 902 VCA
  • 1 x 904A LPF
  • 1x 904B HPF
  • 1x 907 Fixed Filter Bank – use 914 Fixed Filter Bank
  • 3x 911 Envelope Generators
  • 1x 921 VCO
  • 2x 921A VCO Driver
  • 4x 921B VCO
  • 1x 923 Dual Filters & Noise
  • 2x CP3A-M
  • 2x CP3A-O
  • 1x CP35

System 55 This is a large scale modular system with 7x VCO’s and a sequencer.

  • 5x 902 Voltage Controlled Amplifiers
  • 1x 903A Random Signal Generator
  • 1x 904A Voltage Controlled Low Pass Filter
  • 1x 904B Voltage Controlled High Pass Filter
  • 5x 911 Envelope Generators
  • 1x 911A Dual Trigger Delay
  • 1x 914 Fixed Filter Bank
  • 1x 921 Voltage Controlled Oscillator
  • 2x 921A Oscillator Drivers
  • 6x 921B Oscillators
  • 1x 960 Sequential Controller
  • 1x 961 Interface
  • 1x 962 Sequential Switch
  • 1x 992 Control Voltage Panel
  • [1x 993 Trigger and Envelope Voltages Panel – Not Available]
  • 1x 994 Dual Multiples
  • 1x 995 Attenuator
  • 3x CP3A-M Console Panels
  • 3x CP3A-O Console Panels
Copyright AMSynths 2019